P3ProSwing Golf Simulator Two Step Taping

Proper Club Taping – Two Step Tape
Taping your club to be accurately read by the P3ProSwing is pretty easy. When done properly, you will achieve 99.9% accuracy on your swing measurement data, and the ball flight that you see on the screen will be most representative of your swing.

Two Easy Steps:
1. Cover the entire bottom surface of your club with one black non-refective tape. Be sure to wrap the tape slightly up the hosel of the club to make sure there are no false reflections from that surface.
2. Use the supplied applicator guide to position the high intensity reflective strip perfectly paralell to the clb face. Align the middle of the reflective strip to the Sweet Spot (middle of the club face).

Black Non-reflective Driver Tape

   
High Intensity Reflective Strips

Two Step Club Tape Applicator Guide

The following images show properly taped clubs:

Driver
Properly taped driver. Cover the entire bottom of the club with black tape, then align high intensity reflective strip parallel to the face and centered with middle of club.

Iron
Properly taped iron, extending black tape toward hosel to eliminate false reflections. It is not always necessary to tape irons.

Putter
Properly taped putter, using provided putter tape to black out the entire surface of the putter before applying the high intensity reflective strip.

The matte black tape with reflective strip removes easily from your club head, and leaves no residue. 

Questions?  Call Tech Support at 207-824-7403 or email a P3ProSwing Technical Specialist.