This Knowledge Base is designed for the Windows XP Operating System,
Instructions may vary for other Windows Operating Sysytems.

Note: Please be sure that all cables are have a solid connection
and the P3proSwing sensor holes are free of dust and debris.
It is recommended that you use compressed air to blow out the sensor holes frequently
to keep the sensors free of dust and debris.
Use a dry cotton swab to remove any lubricant buildup from the sensors.
(lubricant oil on the sensors may trap dust on the sensors and will not be removed from the sensors by the caned air alone)

Please select an issue and then click the Solve button.

Instruction Downloads

(to save the file - right click the filename and choose "save target as...")

The P3ProSwing was designed to use the RS232 serial port , but will work with the USB port using our full spectrum USB-to-Serial converter BUY NOW. Other USB-to-Serial converters may not handle the amount of data flowing between the P3ProSwing unit and your computer. Shown below are the two types of connections used with the P3ProSwing.
Serial Port	USB Port